News
In the HVAC business, getting the details right is make-or-break. One critical detail that often gets overlooked until the last minute is verifying existing roof curbs when purchasing new adapters. This seemingly small step can have a huge impact on a project, potentially leading to costly mistakes and delays if not done properly. However, with the right approach, simplifying this process can save you time, money, and a whole lot of headaches down the road.
Why On-Site Roof Curb Verification Matters
Before we get into the solution, it's important to understand why physically checking roof curbs on-site is so crucial. Accurate measurements of the existing curbs are key because they serve as the foundation for all subsequent installations. If the measurements are off, you could end up with misalignments, leaks, or even structural issues, leading to expensive repairs later on. Imagine ordering an adapter based on incorrect measurements, only to find out it doesn't fit properly, setting your project back significantly.
The Complexities of Adapter Selection
Choosing the right adapter is no walk in the park. With a wide range of options tailored to specific curb sizes and HVAC systems, the selection process can quickly become overwhelming. Without precise measurements, you're left guessing, which often results in costly errors. This complexity underscores the importance of accurate on-site verification when purchasing adapters.
Our Solution: Making Field Verification Easy
At Curbs Plus, we make verifying roof curbs simple. When you need measurements, just measure the length and width of the curb, and snap photos of all four sides from about 10 feet away. This comprehensive approach helps us identify any potential issues, such as nearby obstructions like exhaust fans, walls, or the roof edge. For larger projects, we can even come out and verify everything in person, ensuring a perfect fit for your needs. By partnering with us, you'll get accurate data for your purchases, saving you time, money, and frustration down the line.
How We Streamline Adapter Purchases
With confirmed measurements in hand, you can navigate the adapter selection process with confidence. Accurate data allows you to pinpoint the ideal adapter for your needs, ensuring seamless integration with your existing curbs and HVAC systems. Our services simplify purchases and minimize the risk of costly errors, giving you peace of mind.
On-site roof curb verification is a critical step in the adapter purchasing process. By partnering with Curbs Plus, you can streamline this task, ensuring accurate measurements and avoiding expensive mistakes. We encourage you to reach out for assistance with your field verification. Our team offers live video call support for real-time guidance. Don't leave your project's success to chance – trust the experts for precise measurements and hassle-free adapter purchases.
In the world of indoor comfort, we often take ventilation for granted. It's there, doing its job silently, but have you ever wondered how it works and what makes it so efficient? One of the key components in any ventilation system is the ventilation cover, and while they might all look similar at first glance, there are distinct differences between grilles, registers, and diffusers. Understanding these differences can help you make informed decisions when it comes to maintaining or upgrading your ventilation system.
Indoor ventilation is essential for maintaining air quality and ensuring the well-being of building occupants. Proper ventilation helps remove pollutants, controls humidity, and provides a continuous supply of fresh air. However, without the right ventilation cover, the effectiveness of your ventilation system can be compromised. Let's explore the nuances of grilles, registers, and diffusers and why choosing the right one matters.
Why Ventilation Matters
Ventilation is not just about keeping the air fresh; it's about ensuring that indoor spaces are healthy and comfortable. Poor ventilation can lead to a range of issues, including:
Contaminants: Indoor spaces can harbor contaminants like dust, lead, mold, radon, pests, carbon monoxide, pet dander, and second-hand smoke.
Humidity: Without proper ventilation, humidity levels can rise, leading to discomfort and creating an environment conducive to mold growth.
Stale Air: Inadequate ventilation results in stagnant, stale air that is unpleasant to breathe and can exacerbate respiratory issues.
To combat these problems, ventilation systems are designed to replace stale, polluted air with fresh, clean air. However, to achieve this effectively, ventilation covers play a crucial role.
Methods of Ventilation
Ventilation can be achieved through two primary methods: natural ventilation and mechanical ventilation.
Natural Ventilation: This method relies on natural air circulation through openings such as windows, solar chimneys, small gaps, and trickle vents. It harnesses natural forces like wind and buoyancy to bring fresh air into the room or area.
Mechanical Ventilation: In contrast, mechanical ventilation employs systems and devices such as fans, ducts, intake/exhaust vents, and air filters to control and direct airflow. It is particularly useful in situations where natural ventilation is insufficient or impractical.
The Role of Vent Covers
Ventilation covers serve multiple purposes in a ventilation system:
Controlled Airflow: They help control the rate and direction of air intake and exhaust, allowing for balanced ventilation.
Aesthetics: Vent covers enhance the visual appeal of ventilation outlets, making them more seamless and integrated into the overall design of a space.
Vent covers come in various types, but three of the most common ones are grilles, registers, and diffusers.
Grilles
Grilles are the simplest of the three types of vent covers. They are primarily designed to allow unobstructed airflow. Grilles are versatile and can be used for both air intake and air exhaust outlets in indoor spaces. They are straightforward and do not involve any moving parts or dampers.
The advantages of grilles lie in their simplicity and ease of maintenance. They are suitable for situations where you need a straightforward cover to allow air to flow in and out without obstruction. Grilles are often used in various locations, such as floor or wall dividers between rooms or floors, enabling air to circulate freely.
However, grilles lack the ability to adjust the direction or volume of airflow, making them less suitable for situations requiring precise control over ventilation.
Registers
Registers are similar to grilles but come with an added feature: adjustable dampers. These dampers can control the direction and volume of airflow. Registers are typically used for air supply outlets, such as those connected to air conditioning ducts and mechanical ventilation systems.
Registers are essential when you need precise control over where the air is directed. The adjustable dampers in registers can be likened to the vents in a car's air conditioning outlets, allowing you to fine-tune the airflow direction or shut off the flow altogether. They are commonly used in commercial spaces and residential areas where controlled ventilation is required.
Diffusers
Diffusers share similarities with registers, as they also have dampers for controlling airflow. However, diffusers differ in their design and airflow direction. While registers typically have a single direction for airflow, diffusers are designed to distribute air in multiple directions.
Diffusers are often found on ceilings, covering air conditioning or air release outlets. They come in various shapes, including square and circular, with vents designed to match the diffuser's shape. Some diffusers, known as eyeball diffusers, are spherical and can be rotated to direct airflow in any direction.
Diffusers are effective when you need to distribute air evenly throughout a room or in specific patterns. The pattern and direction of airflow depend on the design and positioning of the dampers in the diffuser.
Choosing the Right Cover
Selecting the right ventilation cover depends on your specific needs and ventilation system requirements:
Grilles: Choose grilles when simplicity and unobstructed airflow are sufficient. Grilles are ideal for locations where you need air to flow freely in and out without control over direction or volume.
Registers: Opt for registers when you require precise control over airflow direction and volume. Registers are suitable for air supply outlets and spaces where controlled ventilation is essential.
Diffusers: Consider diffusers when you need multi-directional airflow distribution. Diffusers are effective in spaces where even air distribution is crucial, and you want flexibility in airflow direction.
With careful planning and the right product selection, ventilation covers can play a vital role in maintaining indoor air quality, preventing health issues related to air pollutants, and ensuring the comfort of building occupants.
Ventilation is a critical aspect of indoor comfort and air quality. Grilles, registers, and diffusers are essential components that help ensure the efficient operation of ventilation systems. Understanding their differences and choosing the right one for your specific needs can make a significant difference in maintaining a healthy and comfortable indoor environment. So, the next time you enjoy the benefits of proper ventilation, remember the role played by these often-overlooked vent covers.
In manufacturing rooftop components, quality materials are crucial. At Curbs Plus, we prioritize quality over short-term cost savings. Here's why using top-of-industry materials is vital and how it aligns with our commitment to delivering the highest quality products that exceed customer expectations.
The Significance of Quality Materials
Quality materials directly impact the performance and durability of rooftop equipment. By using prime materials, we ensure our products are reliable and long-lasting. These materials offer superior structural integrity while providing superior resistance to corrosion, guaranteeing consistent performance even in harsh conditions.
On the other hand, non-prime materials pose significant risks. Inferior materials compromise overall quality, leading to an increased possibility of failure, reduced lifespan, and potential safety hazards. At Curbs Plus, we prioritize the safety and satisfaction of our customers by choosing only the highest-quality materials.
Curbs Plus' Commitment to Quality
At Curbs Plus, we are committed to delivering high-quality products. We refuse to cut corners; there is no compromise. Our customers deserve the best, and we aim to exceed their expectations by providing products built to last.
Our dedication to quality extends to every aspect of our manufacturing process. From material selection to fabrication and assembly, we employ rigorous quality control measures to ensure our products meet our stringent standards. This commitment sets Curbs Plus apart as an industry go-to when quality is the priority.
We’ve witnessed firsthand how replacing an existing unit can cause anxiety when uncertainty regarding the capability and structural integrity of the existing curb come into question. The stakes are high, and the choice of materials makes all the difference.
Products made with non-prime materials are prone to structural weaknesses. These issues not only escalate costs but also pose potential risks to safety and efficiency.
Quality Assurance and Customer Confidence
Using quality materials is essential to our commitment to quality assurance. We ensure our products consistently meet and exceed customer expectations by adhering to strict quality standards. Incorporating prime materials instills confidence in our customers, assuring them of our commitment to their safety and satisfaction.
The importance of quality materials cannot be overstated in manufacturing rooftop equipment. At Curbs Plus, we refuse to cut corners because we prioritize our customers' safety, durability, and satisfaction. By utilizing prime materials, we deliver products with superior performance, reliability, and longevity. We encourage readers to prioritize quality when choosing rooftop equipment, as the long-term benefits far outweigh any short-term cost savings.
Want to stay updated on the latest industry insights, service innovations, and customer success stories? Join our newsletter list today to receive exclusive content directly to your inbox. Sign up now to be part of our customer-centric community and discover the power of exceptional service.
In remembrance of Jon Steed, our beloved friend, president, and shareholder, we honor a remarkable man whose life was defined by his deep faith, boundless love, and unwavering dedication. Jon Steed, a cherished member of our community, passed away on August 11th, 2024, at the age of 55. Born on December 29th, 1968, in West Palm Beach, Florida, Jon lived a life that deeply touched the hearts of many and left an enduring legacy.
Jon’s faith was the foundation of his life. A devoted member of Oakwood Baptist Church, he was not only a participant but a true servant of the Lord. Leading life groups, contributing to the media team, and steadfastly supporting his congregation were just some of the ways he lived out his profound faith.
In his professional sphere, Jon was the dedicated co-owner and president of Curbs Plus, Inc. Known for setting high standards, his leadership was always accompanied by a nurturing spirit. Jon’s vision extended beyond mere success; he was committed to ensuring that those around him thrived. Colleagues remember him as a leader who genuinely cared about their personal and professional growth.
At home, Jon’s life was a testament to his deep love and commitment to his wife, Jaime. Their 31-year marriage was built on trust, balance, and mutual admiration. Together, they created a welcoming home filled with comfort and beauty. Whether working side by side in the garden or enjoying quiet mornings on the porch, Jon and Jaime found joy in life’s simple pleasures and shared dreams for the future.
Jon’s vibrant spirit and zest for life were infectious. He was the heart of every gathering, always ready with a prank, a spontaneous game, or a daring adventure. His love for the outdoors and his adventurous nature led to countless cherished memories with family and friends. From waterfall jumping and sledding to skydiving, Jon’s enthusiasm was boundless. Weekends often found him camping with close friends, exploring by day, and sharing stories around the campfire by night—stories that grew more legendary with each retelling. That campfire will never be the same without Jon’s infectious energy.
Jon will be deeply missed, but his spirit endures in the countless lives he touched. We find solace in knowing he is at peace, resting in the embrace of God.
In today’s competitive business landscape, standing out is essential. At Curbs Plus, we pride ourselves on being more than just another industry player. We’ve cultivated a unique identity by prioritizing product quality, exceptional service, and reliable, on-time delivery. This newsletter will highlight the key aspects that make Curbs Plus different and why partnering with us can significantly enhance your projects.
Uncompromising Product Quality
At Curbs Plus, we go above and beyond to deliver unmatched product quality that exceeds industry standards. We use only the best traceable materials sourced from reputable suppliers. Our advanced manufacturing processes and rigorous quality control measures ensure that every product leaving our facility is of the highest standard. Our commitment to excellence has earned the admiration of our business partners and those throughout the industry, reinforcing our dedication to delivering superior quality to our customers.
Exceptional Service Experience
Exceptional service is at the core of our business philosophy. We put our customers first, providing an experience that goes beyond their expectations. Our customer-centric approach means we tailor our support to meet your unique needs. Our dedicated team is always ready to offer personalized assistance, prompt responses, and expert guidance. Whether you need technical assistance, customized solutions, or value-added services, we are here to ensure your satisfaction throughout your journey with us.
Reliable On-Time Delivery
We understand the importance of timely project execution, which is why on-time delivery is a top priority at Curbs Plus. Our production processes and efficient logistics enable us to consistently deliver products on schedule. Our team of skilled professionals meticulously coordinates every step of the delivery process. We take pride in our track record of punctuality and strive to exceed our customers’ expectations regarding reliability and adherence to project timelines.
Innovation and Customization
Innovation and customization are key elements that set Curbs Plus apart. We believe in pushing boundaries and finding unique solutions to meet your project requirements. Our experienced design team works closely with you to understand your specific needs and provide tailored products.
Building Strong Relationships
At Curbs Plus, we value the power of strong, long-term relationships with our customers. We are keenly aware that the path to long-term success is to foster open communication, trust, and collaboration to build partnerships that stand the test of time. Our commitment to understanding your goals, challenges, and priorities allows us to provide the best possible solutions. We value constructive feedback so that we may continue to enhance our products and services for our business partners.
Curbs Plus is not your average company. Our commitment to product quality, exceptional service, on-time delivery, innovation, customization, and building strong customer relationships makes us stand out. By choosing Curbs Plus, you gain a reliable partner that sets new standards in the industry. Experience the Curbs Plus difference for yourself and discover the benefits of working with a company dedicated to your success. Contact us today, and let us exceed your expectations.
Rooftop work is inherently risky, and accidents often result in severe consequences. Implementing robust fall protection systems is essential to safeguarding workers. This article delves into the importance of fall protection systems, the different types available, and their benefits.
The Alarming Statistics of Rooftop Accidents
Every year, thousands of rooftop accidents result in injuries, disabilities, and fatalities. According to OSHA, falls are the leading cause of death in construction, with 351 fatal falls in 2020 alone. Effective safety measures, such as fall protection systems, are crucial for preventing these incidents.
Importance of Fall Protection Systems
Fall protection systems are vital for ensuring worker safety on rooftops. They prevent falls and reduce the severity of injuries. Compliance with legal requirements and industry standards mandates the implementation of these systems to protect workers.
Types of Fall Protection Systems for Rooftop Workers
Guardrail Systems:
Provide a sturdy barrier at the edge of roofs.
Safety Net Systems:
Catch nets positioned below work areas to arrest falls.
Personal Fall Arrest Systems (PFAS):
Includes harnesses, lanyards, and anchor points.
Warning Line Systems:
Visual barriers made of lines or ropes create a designated safety zone.
Fall Restraint Systems:
Use harnesses and anchor points to prevent workers from reaching the roof edge.
Benefits of Fall Protection Systems
Enhanced Safety:
Significantly reduce the risk of falls and injuries.
Increased Productivity:
Workers feel safer and more confident, boosting productivity.
Cost Savings:
Preventing accidents reduces workers' compensation claims.
Morale Boost:
Commitment to safety leads to higher job satisfaction among workers.
Best Practices for Implementing Fall Protection Systems
Conduct Thorough Risk Assessments:
Plan safety measures before starting any rooftop work.
Provide Comprehensive Training:
Educate workers on fall hazards and proper system usage.
Perform Regular Inspections:
Ensure equipment is maintained and functioning optimally.
Promote a Safety Culture:
Encourage communication, report near misses, and address concerns promptly.
Emerging Technologies and Innovations in Fall Protection
Wearable Safety Devices:
Smart harnesses and body-worn sensors provide real-time monitoring and alerts, enabling immediate response to potential falls.
Smart Monitoring Systems:
These systems utilize sensors and advanced analytics to identify hazards and enhance system effectiveness, leading to proactive safety management.
Prioritizing fall protection systems is essential for safeguarding rooftop workers. Organizations can minimize fall risks and create safer working environments by understanding and implementing various systems. Compliance with legal requirements, continuous training, and embracing emerging technologies contribute to a safety-first approach. Invest in robust fall protection systems and prioritize the well-being of rooftop workers.
Want to stay updated on the latest industry insights, service innovations, and customer success stories? Join our newsletter today to receive exclusive content directly to your inbox. Sign up now to be a part of our customer-centric community and discover the power of exceptional service.
If you're looking to protect your rooftop unit from movement, consider unit restraints. Here are some common questions and answers about the advantages of using unit restraints for rooftop units.
Q: What are unit restraints?
A: Unit restraints are devices designed to keep rooftop units from shifting or moving during a wind or seismic event.
Q: What are the advantages of using unit restraints for rooftop units?
A: The advantages of using unit restraints for rooftop units include:
Safety: Unit restraints can prevent units from being cast from the roof or toppling, ensuring the safety of nearby occupants and surrounding structures.
Reduced damage: Unit restraints can minimize damage to rooftop units and the building structure, leading to lower repair costs and less downtime.
Compliance with regulations: Many building codes require unit restraints for rooftop equipment, especially in areas prone to high wind or seismic conditions. Using unit restraints assists with compliance with these regulations.
Q: How do unit restraints work?
A: Unit restraints manufactured by Curbs Plus consist of formed G90 brackets that mechanically fasten to the curb and the base rail of the unit. We've also observed the use of cables or straps that secure the rooftop unit to the building structure. All in all, restraints aid in resisting wind and/or seismic forces. Our curb mounted option does not require additional roof penetrations and provides a seamless attachment.
Q: What types of rooftop units can benefit from unit restraints?
A: Many types of rooftop units can benefit from unit restraints, including HVAC units, exhaust fans, generators, and communication equipment.
Q: How do I choose the right restraints for my rooftop unit?
A: When selecting unit restraints, consider factors such as the weight, size, and type of rooftop unit, as well as the building's location and local regulations. Consulting with a professional can help ensure you choose the appropriate unit restraints for your needs.
Q: Can unit restraints be installed on existing rooftop units?
A: Yes, unit restraints can be retrofitted onto existing rooftop units. Depending on your site-specific requirements and conditions it may be costly. It's crucial to have a professional assess the equipment and building structure to determine the suitable unit restraints and installation method. When possible it is best to include unit restraints on the initial installation of the unit.
Q: What is the cost of installing unit restraints for rooftop units?
A: The installation cost of unit restraints varies based on factors such as the type and size of the rooftop unit, building location, and installation method. However, this cost is typically lower than repairing or replacing damaged equipment or structures. When using our curb mounted unit restraints for rooftop equipment, the cost is minimal as the restraints are installed on the curb prior to sitting the unit in place.
In conclusion, unit restraints are an effective way to protect rooftop equipment, those in the surrounding area, as well as nearby structures. By selecting the right unit restraints and working with a professional for installation, you are taking responsible steps to protect both property and the safety of others.
In today's world, the way buildings function is crucial for occupant comfort, productivity, and sustainability. A key solution to enhance building performance is the use of acoustic damping systems. This article breaks down the concept of these systems, explaining how they work and the various ways they contribute to improving buildings.
Understanding Acoustic Damping Systems
These systems are designed to tackle noise and vibrations in buildings. Using different components, they effectively counteract the negative effects of sound and vibrations on both the building structure and its occupants.
Reducing Noise Levels
One significant benefit of acoustic damping systems is their ability to lower noise levels in buildings. They absorb or disperse sound energy, creating a quieter environment. This not only makes occupants more comfortable but also boosts concentration and productivity in places like offices, schools, and healthcare facilities.
Strengthening Building Structure
Beyond noise reduction, acoustic damping systems play a crucial role in fortifying the structural integrity of buildings. By reducing vibrations and resonances, they protect against potential damage from internal factors like HVAC systems.
Energy Efficiency and Sustainability
Implementing acoustic damping systems also contributes to energy efficiency and sustainability. These systems help reduce energy consumption by minimizing the need for extensive noise-control measures, creating a quieter environment that requires less HVAC usage. This aligns with sustainability goals, reducing the building's environmental impact.
Applications Across Industries
Acoustic damping systems have various applications across industries and building types. Concert halls use them for optimal acoustics, offices for tranquil workspaces, and manufacturing facilities for improved safety and efficiency through noise reduction.
Considerations for Implementation
Successful implementation of acoustic damping systems requires careful attention to building design and budget. Collaboration with professionals in acoustic engineering is crucial for seamless integration. Proper installation and ongoing maintenance are vital for optimal and lasting performance.
Interested in staying updated on industry insights and service innovations? Join our newsletter for exclusive content directly to your inbox. Sign up now to be part of our customer-centric community and experience the power of exceptional service.
At Curbs Plus, we understand that exceptional service is the backbone of a successful business. This post delves into the importance of putting customers first and how our customer-centric approach sets us apart. Join us as we explore the value of exceptional service and how it helps us build strong relationships with our business partners.
Understanding the Value of Exceptional Service
Exceptional service is the key to our past success and the reason we are thriving in today's competitive business landscape. We recognize that it goes beyond merely meeting customer expectations. By providing exceptional service, we aim to exceed customer satisfaction, build trust, and ensure long-term mutual success. We believe that happy customers are the foundation of a thriving business.
The Customer-Centric Approach at Curbs Plus
At Curbs Plus, our customers are at the heart of everything we do. We have built a culture centered around putting their needs first. Our customer-centric philosophy drives our interactions with business partners, enabling us to provide personalized attention and tailored solutions. We listen to our customers, understand their unique requirements, and strive to surpass their expectations.
Going Above and Beyond
Exceptional service means going above and beyond the ordinary. We believe in delivering service that delights our customers. Whether it's providing prompt responses to inquiries, offering proactive problem-solving, or offering personalized consultation, we are committed to exceeding expectations. We understand that the little things can make a big difference.
Building Strong Relationships
Exceptional service is instrumental in building strong and enduring relationships with our business partners. We prioritize open communication, actively listen to our customers' needs, and address their concerns promptly. By consistently delivering exceptional service, we establish trust and loyalty. We take pride in the long-term partnerships we have formed based on mutual respect and shared success.
Continuous Improvement and Feedback
We are dedicated to continuous improvement in our service delivery. Customer feedback is invaluable to us, as it helps us identify areas for enhancement and innovation. We actively seek feedback and act upon it to enhance the service experience. By staying responsive and adaptive, we ensure that our service remains exceptional and aligned with our customers' evolving needs.
Exceptional service is the foundation of our success at Curbs Plus. By putting our customers first, we have built strong relationships and earned the trust of our business partners. We encourage all businesses to prioritize exceptional service, as it fosters trust, loyalty, and long-term success. Join us on this journey of delivering exceptional service, and let us assist you in achieving remarkable results.
Want to stay updated on the latest industry insights, service innovations, and customer success stories? Join our newsletter list today to receive exclusive content directly to your inbox. Sign up now to be a part of our customer-centric community and discover the power of exceptional service.
Exciting news! Curbs Plus recently had the privilege of sponsoring and attending the Summer Outdoor Concert held at the Northwest Georgia Amphitheater over the weekend.
What makes this event even more special is that all proceeds from ticket sales are being dedicated to remarkable causes. We take great pride in supporting the Building Fund for the future Crossroads Unity Family Park, which aims to create an inclusive playground for all ages with a particular focus on Adults with Disabilities. Additionally, the funds will contribute to Restoring Baseball to the Inner City (RBI) and the preservation of the Chickamauga & Chattanooga National Military Parks.
The concert itself was a spectacular showcase of talent, featuring mesmerizing performances by Ben Chapman, Iron Horse, Neon Moon, and Low Down Revival. The energy and passion displayed by these artists on stage were absolutely electrifying!
As proud sponsors, Curbs Plus was thrilled to be part of this musical extravaganza while also supporting such worthy causes. We firmly believe in the transformative power of music and the positive impact it can have on communities.
A heartfelt thank you goes out to the organizers of the Summer Outdoor Concert for their meticulous planning, flawless execution, and their unwavering commitment to giving back to the community. Your hard work has truly made a difference.
We would also like to express our deep gratitude to everyone who attended the concert. Your presence not only made the event an unforgettable experience but also contributed to our collective efforts in making a lasting impact.
If you missed out on this fantastic event, fret not! Stay tuned for upcoming updates on future concerts, sponsorships, and community initiatives by following Curbs Plus. Together, let's continue to support and make a difference in our community through the power of music!
On behalf of everyone at Curbs Plus, we want to share what an incredible evening we had at the ballpark!
We are immensely grateful to everyone who joined us in cheering on the Chattanooga Lookouts at AT&T Field while supporting some amazing causes.
The Building Fund for the future Crossroads Unity Family Park for an “all ages” playground with special emphasis on Adults with Disabilities
Restoring Baseball to the Inner City - RBI
Let's continue to come together for more meaningful events in the future. Your unwavering support and participation are invaluable in shaping a stronger, more cohesive community.
Curbs Plus proudly supports Compass360's remarkable efforts and visionary work. Here's an inspiring update from the front lines, inviting you to join us in making a difference.
In Chisunka, the farm thrives, with maize production expected to surge by approximately 50% this season compared to last year. Additionally, the cultivation of a hectare of soybeans expands the agricultural endeavors, fostering growth and prosperity.
Great strides have been made in the fundraising campaign, with 40% of the $29K target already raised to build the compound and acquire a much-needed truck. We are grateful for the opportunity to support these endeavors, evident through the Compass360 logo proudly displayed on the branded truck. Our collaboration represents a shared commitment to this noble mission!
During the project's initial phase, Curbs Plus recommended investing in a block-making machine with a mixer, optimizing efficiency and cost-effectiveness. This approach saved approximately $2K and created employment opportunities for local residents involved in block production, making a positive impact on the community.
Mark your calendars for the upcoming "Pathway" camp in October. Supported by Curbs Plus, this transformative initiative aims to touch the lives of over 120 young individuals aged 13 to 20. Through spiritual guidance, nourishing meals, engaging activities, and exposure to various trades, we strive to foster personal growth and equip these youth with valuable skills. Our joint vision is to guide them towards a brighter future.
We express our deepest gratitude for the privilege of supporting this mission and our valued partnership with Compass360. To contribute or learn more about the impactful work being done, please visit www.360Missions.org. Together, let's make a meaningful difference!
The Gary Brower Memorial Golf Classic was a remarkable event that took place in Chattanooga. The event was a great opportunity for the community to come together and support a meaningful cause, the ministries of SCORE International.
SCORE International is a global missions organization that was founded in 1984 by Ron Bishop, a former head basketball coach at Tennessee Temple University. The organization started as a sports ministry that focused on short-term mission trips, but it soon expanded to become a powerful force for global missions that has impacted countless lives.
Under Ron Bishop's leadership, SCORE International added career missionaries in domestic and international locations, taking tens of thousands of people on short-term mission trips. Ron Bishop's vision and legacy continue to inspire and impact the lives of people worldwide.
The Gary Brower Memorial Golf Classic was an excellent opportunity for the Chattanooga community to show its support for SCORE International and its mission to share the love of Christ through sports and global missions. The event was a perfect blend of fun and philanthropy, bringing together golf enthusiasts and supporters of the cause for a day of golfing, entertainment, and community.
We are proud to have been a part of this event and to support the efforts of SCORE International in making a positive difference in the world. The Gary Brower Memorial Golf Classic was a testament to the power of community and the impact that can be achieved when people come together for a good cause. We look forward to continuing our support for SCORE International and its mission to share the love of Christ with people worldwide.
We are fortunate to be an ongoing partner in support of Children's of Alabama. If you are looking for a wonderful cause to support that is impacting the lives of children and their families we urge you to consider Children's of Alabama.
We want to draw your attention to the Sean Karl Foundation. The Sean Karl Foundation works to raise funds for the research and defeat of Ewing Sarcoma as well as to raise awareness of the insufficient funding for pediatric cancer research and treatment as a whole. If you're looking for a wonderful cause we ask that you consider the Sean Karl Foundation.
Curbs Plus is excited to partner with From Here to Career Academy. The Academy works with Catoosa County GA high school students so that they graduate with college credit, technical college credentials, and professional skills to be successful in college and career.
Curbs Plus is headed back to the future! Due to the support of our business partners as well as the launch of our NuVue equipment screening line, Curbs Plus is pleased to announce we are reopening our Rossville GA facility for fabrication of our plenum and concentric diffusers as well as our curb mounted equipment screen systems.
Curbs Plus is proud to be the first metal building roof curb manufacturer to formally join MBMA. We look forward to a committed team effort to move the metal building industry forward into the future.
It's a dry heat! We are excited to announce the launch of our new facility in Glendale AZ. We could not have made this move without or committed business partners. This facility will fabricate all of our curb and support products as well as much of our diffuser line. Thank you to the Glendale community for such a warm welcome!
Hello Mt. Union PA! Curbs Plus is thrilled to launch our new 49,000 square foot facility in this wonderful community. By enhancing our abilities in the Northeast we hope to add even more value and support to our business partners in the region.
Curbs Plus is making moves for the future by expanding our headquarters to a new 150,000 square foot facility in beautiful Ringgold GA. This facility will house all of our sales support, customer service, design, and product development. Curbs Plus is proud to be a new member of the Ringgold community.
Curbs Plus plus is excited to announce the launch of our new 60,000 square foot production facility in El Dorado KS. We look forward to providing enhanced service for our business partners in the midwest and being committed members of the El Dorado community.
